Matching hood case for Line6 Helix LT Guitar Processor with Mission Engineering EP-1 pedal
Coated from 6.8 mm birch multiplex phenolic resin
22 x 22 mm aluminum edge
2 small butterfly locks
1 case handle with cap
8 ball corners small
4 rubber feet 38 x 10 mm
Foam padding
9 cm cable duct at the back for connections
Device can be operated in the lower part
Made in Germany
External dimensions WxDxH approx .: 752 x 443 x 157 mm
Weight approx .: 6.4 kg
| Weight | 6,4 kg |
|---|---|
| Dimensions | 75,2 × 44,3 × 15,7 cm |
suitable Flightcase for the Line6 Helix Guitar Processor floor pedal From 6,8 mm birch plywood Coated with phenolic resin Color:
suitable Pedalcase for a Line6 FBV-3 Footswitch Controller | device can be used in the Case | made in Germany
suitable hoodcase with foam padding for Kemper Profiler Remote incl. Mission Engineering EP-1 6,8mm birch plywood phenol coated colour: brown
suitable Pedalcase for Line6 HX Stomp incl. Mission Engineering Expression Pedal EP1, SP1 | Device can be operated in the lower part
suitable Flightcase for Line 6 Helix Control incl. Mission Engineering EP1 Pedal on the right side 6,8 mm birch plywood
suitable Pedalcase for a Line6 FBV-3 Footswitch Controller 6.8 mm birch plywood phenolic resin coated Color: brown 22 x 22
suitable Flightcase for Line6 Helix Control incl. Mission engineering EP-1 L6BK and Ernie Ball EB6180 VP-JR pedal 6,8mm birch plywood
suitable Flightcase Line6 Helix LT guitar processor Material: 7 mm birch plywood 22 x 22 mm aluminium edges 2 Butterfly
suitable Flightcase Roland GR-55 Guitar effect device From 7 mm Birch plywood With 22 x 22 mm aluminium edges Min.
suitable Flightcase for Neural DSP Quad Cortex incl. a mission engineering EP1 Expression Pedal, from 6.8mm multiplex phenolic resin coated
Double Door Amp Case 4.5 U including a removable effects board | Installation depth approx. 30 cm | Made in Germany
suitable Hoodcase for Headrush Pedalboard Material: 7 mm Birch plywood 22 x 22 mm Aluminium edge 2 Butterfly latches 1
